Motorbikespecs logo Sponsor

Honda - NT 400 L Bros MKll (NC25) PGM Ignition 90-92

NC25 1000001

NT 400 L Bros MKll (NC25) PGM Ignition image  
Do you have any images of this bike? Upload them here
Edit These Specs
List Honda Models
List Makes
Contact Admin
Bike Description and General information
Same as J/K except with wider tyres and an 18" rear wheel as well as programmable ignition.
Service Infromation
Fork oil grade : 10W
Sprocket carrier bearing : 6007 2RS
Cooling System (litres) : 2 litres total, 1.6 litres after drain.
Tyre Pressure Front Bar / psi : 33 psi
Tyre Pressure Back Bar / psi : 33 psi, 36 psi for prolonged high speed riding.
Engine Oil quantity with filter (litres) : 2.3 liters
Idle Speed (rpm) : 1200 +/- 100 rpm
Spark Plugs Gap (mm) : 0.8mm - 0.9mm

Honda NT 400 L Bros MKll (NC25) PGM Ignition 90-92 Parts & Accessories

Front Disc
Front Disc Size 320mm
Front-Pistons-per-caliper 4
Rear Disc
Rear Disc Size 208mm
Rear-Pistons-per-caliper 1
Length 2080mm
Width 0.695mm
Height 1060mm
Seat Height 0.778mm
Wheelbase 1425mm
Ground Clearance 0.155mm
Rake 27 degrees
Trail 111mm
Dry Weight 179 Kg
Fuel Capacity 10 Litres + 2 Litre reserve
Reserve Fuel Capacity 2 litre
Voltage 12v
Main Fuse 30A main, 10A x 6, 15A x 1.
Ignition CDI
Spark Plugs 4 x DPR8EA-9
Type Liquid Cooled 4 Stroke SOHC V Twin
Bore x Stroke 64mm x 62mm
Compression Ratio 10:1
Displacement 398cc
No. of Valves 6 - 2 Inlet 1 Exhaust Per Cylinder
Valve Train Silent chain
Lubrication System Forced pressure and wet sump
Starting Electric starter
Air Filtration Paper element
Carburation Two CV carbs
Gear Ratio 1st 14/42
Gear Ratio 2nd 17/32
Gear Ratio 3rd 20/30
Gear Ratio 4th 25/31
Gear Ratio 5th 27/29
Sprocket front JTF 296-16
Sprocket rear JTR 1311-44
Final Drive O-ring chain
Chain Number of Links 112
Gearchange Pattern 1-N-2-3-4-5
Transmission 5 speed manual
Motorcycle Style ROADSTER
Exhaust 2 into 1 with collector, stubby exhaust can
Frame Twing tube diamond, aluminium, with stressed member.
Power/Weight Ratio 0.15 KW per Kg
Max Power Output 37 PS or 36 Hp at 8500 rpm
Max Torque 35 at 6500 rpm
Front 41mm Showa Telescopic Fork, 130mm travel
Rear Monoshock, 120mm axle travel.
Front 120/70-17 Tubeless
Rear 150/60-18 Tubeless
Rear Two 6908 LU 40mm x 62mm x 12mm, and one needle roller bearing with no inner ring NK50/25 50mm x 62mm x 25mm.
Bearing Front Right 6004 LU, 20mm x 42mm x 12mm
Bearing Front Left 6004 LU, 20mm x 42mm x 12mm

All information is to the best of the Motorbike specs knowledge at the given time, the information is intended only as a guide.

A major japanese manufacturers quote:

We reserve the right to vary our specification with or without notice and at such time and in such manner as we think fit.

Have you any ideas or suggestions for Motorbikespecs?
Spotted any errors or problems?Please let us know.
© Motorbikespecs 2007-17 || Terms & Conditions || Sponsored